Home 
Delivery 48h 
Secure payments 
Technical & commercial support
RD-SuperLatex
Technical sheetSuper mat high quality interior acrylic latex paint for walls and ceilings.
This product is ideal for customers looking for a quality solution at a low price. RD-SuperLatex is a superior quality latex and therefore washable.
Calculate here the amount of paint needed for your project
Technical sheet
This is heading element
Description of the product
USE:
Super mat high quality interior acrylic latex paint for walls and ceilings.
FEATURES:
Single component water-based acrylic coating with very high hiding properties. The higher amount of binder makes it a particularly resistant coating that can be applied in corridors, warehouses, production halls, workshops …
RD-Superlatex is water-based, easy to handle, safe and has no fire risks.
It is a fast-drying coating system that greatly reduces downtime during installation.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
SUBSTRATES:
New and old masonry - Cement – Concrete – Bricks – Plaster – Gyproc
Systems
Non-porous substrates, painted surfaces, … | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
Primer | RD-Superlatex | 105 / 4,2 | 45 / 1,8 | 0,10 L / 390 | |
Finish | RD-Superlatex | 105 / 4,2 | 45 / 1,8 | 0,10 L / 390 | |
TOTAL | 90 / 3,6 | 0,20 L / 195 | |||
Unpainted porous substrates | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
Impregnation | RD-Unifix | 0,10 L / 400 | depends on porosity | ||
Primer | RD-Superlatex | 105 / 4,2 | 45 / 1,8 | 0,10 L / 390 | |
Finish | RD-Superlatex | 105 / 4,2 | 45 / 1,8 | 0,10 L / 390 | |
TOTAL | 90 / 3,6 | ||||
Risks of chemical spills or graffitis:
The system can be top coated by one or two coats of RD-Hydrograff HP.
Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.
Application instructions
APPLICATION CONDITIONS:
Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
Relative humidity: maximum 80 %
Dew point > 3°C (5°F)
APPLICATION MEANS:
Brush, roller or airless (nozzle size: 013–015)
Application by airless is recommended and makes it easier to reach the recommended thicknesses. Use a device that allows a minimum pressure of 60 - 90 bar / 870 – 1305 psi at the outlet.
PREPARATION OF THE SUBSTRATE:
The substrate has to be clean, dry, and free of dust.
New masonries must be cleaned first with an iron brush to eliminate all spatters of mortar.
Painted substrates should be cleaned with a high-pressure washing machine.
If the support is mossy, the moss must be removed with a special anti-moss product.
Fill up the cracks with RD-Acryl W.
Use RD-Cement Filler to repair important repairs on concrete.
DILUTION:
Product is ready-for-use.
DRYING TIME (20°C - 68°F):
Touch dry: +/- 2 hours
Recoatable: +/- 4 hours
CLEANING OF TOOLS:
Water
SPECIFICITIES:
Mix well before use.
Technical data
FINISH (Gardner 60°):
Extra Mat – 5% +/- 5
COLOURS:
Stock colours: White.
RAL, NCS and bespoke colours. Available from minimum 100L
DENSITY:
1.45 +/- 0.05 g/cm³
SOLIDS CONTENT:
In weight: 60 % +/-2
In volume: 43 % +/-2
VISCOSITY:
100 - 150 P (Brookfield 20RPM)
VOC CONTENT:
< 30 g/L
FLASH POINT:
Not flammable
STORAGE:
24 months, keep away from frost and store away from heat.
Norms et tests
 | ISO 16000-6 / VOC Classification in France |
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
VERS. WI27/230221
Super mat high quality interior acrylic latex paint for walls and ceilings.