RD-Elastoroof Alu

    Technical sheet

    Waterborne onecomponent acrylic paint for roofs. The film has a decorative aluminium look.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    4 l
    20 l
    Total quantity selected (L): 0
    Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0

    (*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

    Technical sheet

    Description of the product

    USE: 

    Waterborne onecomponent acrylic paint for roofs. The film has a decorative aluminium look.

    FEATURES:

    The film is waterproof and very elastic - Very good adherence.

    SUBSTRATES:

    Suits to asbestos-cement roofs, shingles, roofing …

    Systems

    Porous, not treated surfaces :

    • Primer: 1 impregnation coat of RD-UNIFIX

    • Top coat: 1 or 2 coats of RD-ELASTOROOF ALU or 1 coat of RD-ELASTODECK and, after that, 1 coat of RD-ELASTOROOF ALU.

    Iron and steel:

    • Primer: 1 coat of RD-ELASTOMETAL

    • Topcoat: 1 coat of RD-ELASTOROOF ALU.

    Bituminous substrates older than 1 year can be directly recovered with 1 or 2 coats of RD-ELASTOROOF ALU or 1 coat of RD-ELASTODECK and, after that, 1 coat of RD-ELASTOROOF ALU.

    On flat roofs it is recommended to use a mesh RD-ROOF FLEECE.

    CONSUMPTION:

    From 0.5 L/m² (paint system) to 2 L/m² (waterproof system)

    Application instructions

    APPLICATION CONDITIONS:

    Outdoor: never apply if raining
    Ambient temperature: > 5° C
    R.H.: max. 80 %
    Never apply under heavy sun

    APPLICATION MEANS:

    Brush or roller

    PREPARATION OF THE SUBSTRATE:

    The substrate has to be dry, degreased, brushed and the moss has to be removed.

    WARNING: On any kind of substrate the room underneath should be equipped with a vapour barrier and sufficient roof ventilations in order to avoid the formation of condensation under the roof. The slope to the drain-pipes should be large enough to fully collect the rain.

    DILUTION:

    Product is ready-for-use.

    DRYING TIME (20°C - 68°F):

    Touch dry: +/- 3 hours
    Recoatable: +/- 24 hours

    CLEANING OF TOOLS:

    Water

    SPECIFICITIES:

    Mix well before use.

    Technical data

    FINISH (Gardner 60°):

    High gloss

    COLOURS:

    Aluminum

    DENSITY:

    1.02 +/- 0.05 g/cm³

    SOLIDS CONTENT:

    In weight:  52 % +/-2
    In volume: 49 % +/-2

    VISCOSITY:

    100 - 125 P (Brookfield 20RPM)

    VOC CONTENT:

    < 90 g/L

    FLASH POINT:

    Not flammable

    STORAGE:

    24 months, keep away from frost and store away from heat.

    Safety data

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.