Home 
RD-Multiprim 
Universal adhesion primer for non-ferrous and smooth surfaces.
From €30.64 / L View
Universal adhesion primer for non-ferrous and smooth surfaces.
From €30.64 / L
View
Delivery 48h 
Secure payments 
Technical & commercial support
Calculate here the amount of paint needed for your project
RD-Aquatop PU Mat
Go totechnical sheet
High-performance, one-component, quick-drying, mat-gloss finish lacquer for interior and exterior application.
RD-Aquatop PU can be applied directly on many substrates, or as a finish on our anti-corrosion systems when a greater variety of effects (gloss) and high aestetics is required.RD-Aquatop PU has good resistance to UVs, weathering and abrasion.
From 36,36 € / L VAT incl.
We deliver worldwide. Online sales are available for Benelux and France; shipping costs are calculated in the shopping cart. For all other destinations, please ask us for a quote.Technical sheet RD-Aquatop PU Mat
Download technical sheetDescription of the product
USE:
High performance interior and exterior enamel with superior properties.
FEATURES:
RD-Aquatop PU is a single-component top coat based on acrylic and polyurethane resins that offers a hard flexible and wear resistant film that can be used for decorative and protective purposes.
RD-Aquatop PU is water-based, easy to handle, safe and has no fire risks.
It is a fast-drying coating system that greatly reduces downtime during installation.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
RD-Aquatop PU creates a nice and smooth finish. Thanks to its high-quality pigments, it offers very good resistance to humidity and has a very good outdoor durability.
RD-Aquatop PU has successfully been tested to be used for constructions regulated by the LIVING BUILDING CHALLENGE – LEED.
SUBSTRATES:
Various plastics, concrete, cement, wood, metal (with primer), coated surfaces, …
Systems
Ferrous metals | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
Primer | RD-Monoguard | 200 / 8 | 85 / 3,4 | 0,20 L / 200 | Coverage depends on colour contrast. An extra coat may be required |
Finish | RD-Aquatop PU | 100 / 4 | 40 / 1,6 | 0,10 L / 400 | |
TOTAL | 125 / 5 | ||||
Non-ferrous metals – (stainless steel, aluminium, …), plastics: | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
Primer | RD-Multiprim | 100 / 4 | 40 / 1,6 | 0,10 L / 400 | Coverage depends on colour contrast. An extra coat may be required |
Finish | RD-Aquatop PU | 100 / 4 | 40 / 1,6 | 0,10 L / 400 | |
TOTAL | 80 / 3,2 | ||||
Wood, concrete, hard plastics: | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
Primer | RD-Aquatop PU | 100 / 4 | 40 / 1,6 | 0,10 L / 400 | |
Finish | RD-Aquatop PU | 100 / 4 | 40 / 1,6 | 0,10 L / 400 | |
TOTAL | 80 / 3,2 | 0,20 L / 200 | |||
Tannic and exotic woods | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | |
Primer | Deco Isomat Aqua | 125 / 5 | 60 / 2.4 | 0,13 L / 325 |
2nd layer | RD-Aquatop PU | 100 / 4 | 40 / 1,6 | 0,10 L / 400 |
Finish | RD-Aquatop PU | 100 / 4 | 40 / 1,6 | 0,10 L / 400 |
TOTAL |
| 140 / 5.6 | ||
Pre-painted elements like doors, plinths,…: | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
Primer/Finish | RD-Aquatop PU | 100 / 4 | 40 / 1,6 | 0,10 L / 400 | Coverage depends on colour contrast. An extra coat may be required |
Aesthetical fresh-up:
A single coat is possible on previously painted surfaces in need of an aesthetic refreshment.
Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.
Application instructions
APPLICATION CONDITIONS:
Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
Relative humidity: maximum 80 %
Surface temperature must be minimum 3°C (5°F) above dew point.
APPLICATION MEANS:
Brush, roller or spray gun.
Compressed air: nozzle opening 1,4 mm – 4 to 6 bars of pressure (60 to 90 psi)
Airless: nozzle opening 007 to 009 – Pressure +/- 70 bars (+/- 1000 psi)
PREPARATION OF THE SUBSTRATE:
Preparation will depend on the type of substrate. In general, the surface should be clean and degreased before applying RD-Aquatop PU.
On tannic or exotic woods, we recommend using RD-Deco Isomat Aqua as a first coat to prevent tannin migration through the paint film.
DILUTION:
Product is ready-for-use.
DRYING TIME (20°C - 68°F):
Touch dry: +/- 1h30 hours
Dry: +/- 2 hours
Recoatable: +/- 4 hours
CLEANING OF TOOLS:
Water
SPECIFICITIES:
Mix well before use.
Technical data
FINISH (Gardner 60°):
Mat: 7 +/- 5
COLOURS:
Stock colours: White.
RAL, NCS and bespoke colours.
Available on RD Coatings dispensing system.
DENSITY:
1.2 +/- 0.05 g/cm³
SOLIDS CONTENT:
In weight: 47 % +/-2
In volume: 39 % +/-2
VISCOSITY:
20 - 30 P (Brookfield 20RPM)
VOC CONTENT:
< 50 g/L
FLASH POINT:
Not flammable
STORAGE:
24 months, keep away from frost and store away from heat.
Norms and tests
RED LIST COMPLIANCE | Living Building Challenge v3 |
VOC EMISSION TEST RESULTS | California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017 |
TVOC CONCENTRATION RANGE | USGBC’s LEED v4 rating systems |
USGBC LEED Version 4, BD&C, ID&C | |
The WELL Building Standard | |
ANSI/GBI 01, Green Building Assessment Protocol | |
 | ISO 16000-6 / COV classification in France |
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
VERS. S052/230215
Related products
RD-Multiprim
High-performance, one-component, quick-drying, mat-gloss finish lacquer for interior and exterior application.