RD-Elastodeck

    Technical sheet

    Single-component liquid waterproofing system for roofs, decks and balconies.

    Water-based coating formulated on the basis of special resins for sealing flat surfaces. RD-Elastodeck is very easy to use and can be applied in less than a day under favorable climatic conditions.Very efficient, it can be used on on many substrates such as old bituminous roofing, fiber cement tiles or concrete.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    1 kg
    Surface 1 coat: 1.00m²
    5 kg
    Surface 1 coat: 5.00m²
    25 kg
    Surface 1 coat: 25.00m²
    Total quantity selected (Kg): 0
    Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0 m²

    (*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

    Technical sheet

    Description of the product

    USE: 

    Single-component liquid waterproofing system for roofs, decks and balconies.

    FEATURES:

    Water-based coating based on special resins for the waterproofing of flat surfaces. RD-Elastodeck is very easy to use and can be applied in less than a day in favourable weather conditions. Very effective, it can be applied over a broad range of different type of substrates including old bitumen roofs or fibre-cement. It’s an excellent waterproofing system for small ‘til large scale projects. When renovating a flat surface, using RD-Roof Fleece is strongly recommended and will extend considerably the lifespan of the system.

    RD-Elastodeck is water-based, easy to handle, safe and has no fire risks.
    It is a fast-drying coating system that greatly reduces downtime during installation.
    Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings. 

    RD-Elastodeck is UV resistant and is meant to be applied as primer and finishing coat. It should be top coated by other RD Coatings systems in case the surface will be subject to wear like foot or car traffic. Its permanent 200% elasticity enables it to adhere even on flexible or soft surfaces like roofing. It is a Dry Fall coating; any overspray turns into dry dust and can easily be removed.

    RD-Elastodeck is part of the SCS – Single Coating System - product group.

    SUBSTRATES:

    Concrete, weathered PVC and EPDM membranes, old bituminous membrane (> 1 year), cement, fibre-cement, …

    Systems

    Flat roofs and slopes < 4% in rainy temperate and continental climate.

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

     

    RD-Roof Fleece

    The Fleece is unrolled on the roof prior to applying the coating.

     

    Primer

    RD-Elastodeck

    320 / 13

    175 / 7

    0,40 Kg / 128

    High lifespan
    > 10years

    Finish

    RD-Elastodeck (*)

    1270 / 51

    705 / 28

    1,60 Kg / 32

    TOTAL

     

    880 / 35

    2 Kg / 25

     

    (*) The indicated thickness is achievable in one coat when spraying with an airless device in favourable weather conditions. Several layers may be necessary when applied by other means or less favourable weather conditions.

    Flat roofs and slopes < 4% in dry temperate and continental climate.

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

     

    RD-Roof Fleece

    The Fleece is unrolled on the roof prior to applying the coating.

     

    Primer

    RD-Elastodeck

    320 / 13

    175 / 7

    0,40 Kg / 128

    High lifespan
    > 10years

    Finish

    RD-Elastodeck (*)

    875 / 35

    480 / 20

    1,10 Kg / 46

    TOTAL

     

    655 / 27

    1,50 Kg / 34

     

    (*) The indicated thickness is achievable in one coat when spraying with an airless device in favourable weather conditions. Several layers may be necessary when applied by other means or less favourable weather conditions.

     

    Roofs and slopes > 4%, fibre-cement tiles, concrete tiles, bituminous tiles, …

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    RD-Elastodeck

    255 / 10

    140 / 5,6

    0,32 Kg / 160

    High lifespan
    > 10years

    Finish

    RD-Elastodeck (*)

    255 / 10

    140 / 5,6

    0,32 Kg / 160

    TOTAL

     

    280 / 11

    0,64 Kg / 80

     

    Risks of chemical spills or next to aggressive exhausts:

    The system can be top coated by one or two coats of RD-Hydrograff HP.

    Risks of ponding water for several days.

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

     

    RD-Roof Fleece

    The Fleece is unrolled on the roof prior to applying the coating.

     

    Primer

    RD-Elastodeck

    320 / 13

    175 / 7

    0,40 Kg / 128

    High lifespan
    > 10years

    Intermediate

    RD-Elastodeck (*)

    1040 / 42

    575 / 23

    1,30 Kg / 39

    Finish

    RD-Elastodeck (*)

    1040 / 42

    575 / 23

    1,30 Kg / 39

    TOTAL

     

    1325 / 53

    3,00 Kg / 16

     

    (*) The indicated thickness is achievable in one coat when spraying with an airless device in favourable weather conditions. Several layers may be necessary when applied by other means or less favourable weather conditions.

    Balconies & decks

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    W

    A

    T

    E

    R     L

    P     A

    R     Y

    O     E

    O     R

    F

    I

    N

    G

    Primer on porous surface

    RD-Unifix

     

     

    0,10 L / 405

    Depending on porosity

    Primer on non-porous surface

    RD-Elastodeck diluted with 25% water

    245 / 10

    100 / 4

    0,30 Kg / 167

    High lifespan
    > 10years

     

    RD-Roof Fleece

    The Fleece is unrolled on the dry primed surface

     

    Finish

    RD-Elastodeck (*)

    1365 / 55

    750 / 30

    1,70 Kg / 30

    TOTAL

     

    655 / 27

    1,50 Kg / 34

     

    (*) The indicated thickness is achievable in one coat when spraying with an airless device in favourable weather conditions. Several layers may be necessary when applied by other means or less favourable weather conditions.

    W    L

    E     A

    A     Y

    R     E

            R

    Household foot traffic

    Finish

    RD-Monofloor PU

    200 / 8

    85 / 3,4

    0,20 L / 200

    1 or 2 coats

    Intensive traffic

    Finish

    RD-Hydrograff HP Gloss

    105 / 4

    50 / 2

    0,10 L / 390

    1 or 2 coats

    Weathered EPDM and PVC membranes:

    Apply a first coat of RD-Elastodeck diluted with 25% water as primer.

    Because of various qualities of membranes on the market, always perform an adhesion test first.

    Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.

    Application instructions

    APPLICATION CONDITIONS:

    Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
    Relative humidity: maximum 80 %
    Surface temperature must be minimum 3°C (5°F) above dew point.

    APPLICATION MEANS:

    Brush, roller or airless (nozzle size: 015–023)
    Application by airless is recommended and makes it easier to reach the recommended thicknesses. Use a device that allows a minimum pressure of 180 bar / 2600 psi at the outlet.

    PREPARATION OF THE SUBSTRATE:

    The surface must be clean, dust-free and dry.

    In case of mosses on the support, remove it with a special anti-moss product.
    Repair cracks using RD-ACRYL W.

    Use RD-CEMENT FILLER to perform concrete repairs.

    ATTENTION: for all types of supports, the interior spaces must be equipped with steam barriers and sufficient roof ventilation to avoid the formation of condensation under the roof covering.

    Sufficient slope must be provided to the waterways to collect rainwater.

    DILUTION:

    Product is ready-for-use. Otherwise dilute with water on porous or smooth surfaces or when applying in warm weather conditions (> 25°C / > 77°F).

    DRYING TIME (20°C - 68°F):

    Touch dry: +/- 3 hours
    Recoatable: +/- 6 hours depending on the thickness.

    CLEANING OF TOOLS:

    Water

    SPECIFICITIES:

    Mix well before use.
    RD-Elastodeck has a very high hiding power, it may be advisable in some cases to use a different colour for the first and second coat for better recognition. 

    Technical data

    FINISH (Gardner 60°):

    Satin – 15%+/- 5

    COLOURS:

    White, RAL, NCS and bespoke colours.
    Available on RD Coatings dispensing system.

    DENSITY:

    1.25 +/- 0.05 g/cm³

    SOLIDS CONTENT:

    In weight:  66 % +/-2
    In volume: 55 % +/-2

    VISCOSITY:

    200 - 300 P (Brookfield 20RPM)

    VOC CONTENT:

    < 7 g/L

    FLASH POINT:

    Not flammable

    STORAGE:

    24 months, keep away from frost and store away from heat.

    Norms and tests

    LEEDV4 VOC EMISSIONS

    CDPH/EHLB/Standard Method V 1.2

    WATERPROOFING TO CLEAR WATER

    INTERNAL TESTS

    ISO 16000-6 / COV classification in France

    Safety data

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.

    VERS. R011/230222